Furuno FAR2167DS-BB - Manual (Page 16)

1-9
Fastening monitor unit to hanger
Attaching hand grips
Hand grips are optionally available for the desktop-mount monitor unit. Attach them as follows:
1. Remove the snap buttons attached at step 5 on the previous page.
2. Fix hand grips with wave washers, rosette washers and flat head screws.
How to attach hand grips
Panel cover
Hex bolt
(M6x25)
Hanger (R) Hanger stay
M12 bolts for fixing
(Dockyard supply)
Hanger (L)
Hex bolt
M10x30
Snap button
Hole plug
Panel cover
To remove this, insert fingernail in groove.
Flat Washer M10
Spring Washer M10
Hand grip
Flat head screw (torque: 7.6 Nm)
Wave washer
Rosette washer