Furuno FAR2167DS-BB - Manual (Page 18)

1-11
Fixing without KB fixing plate
1. Drill four mounting holes of 5 mm diameter, referring to the outline drawing at the back of this
manual.
2. Fix the control unit with four screws (M4) from the under side of the desktop. (M4 screws with
a sufficient length for the thickness of the desktop should be provided locally.)
Mounting dimensions for control unit RCU-014
Mounting dimensions for control unit RCU-015/RCU-016
#70
308±1
398
136±1
180
4-M4 (Fixing holes)
(bottom) # Minimum recommended service space
F4
F3
F2
F1
180
24 32
110±1
160
136±1
4-M4 (Fixing holes)
(REAR)