Furuno FAR2167DS-BB - Manual (Page 50)

3-9
INSTALLATION menu
Open the INSTALLATION menu by choosing 4 INSTAL-
LATION from the INITIALIZE menu.
RADAR
Choose main radar or sub radar.
RANGE UNIT
Choose NM, SM, km or kyd (kilo yard) as appropriate. For
the IMO- and A-type radars the range unit is fixed at "NM".
RADAR NO and RADAR POSN
For multiple radar system using the network hub, set
number (name) and antenna position for each system, to
easily distinguish radars from one another.
MODEL
Choose "60".
TYPE
Choose radar type from among the following options:
IMO: IMO compliant
A:
Near-IMO specifications
B: International fishing vessels
C: Japanese flag vessels
W: Washington state (USA) ferry
ON TIME and TX TIME
These items show number of hours the radar has been turned on and transmitted, respectively.
Value can be changed; for example, after replacing magnetron TX Time can be reset to 0.
[INSTALLATION]
1 BACK
2 RADAR
MAIN /SUB
3 RANGE UNIT*
1
NM /SM/km/kyd
4 RADAR NO* 2
1 /2/3/4/5/6/7/8
5 RADAR POSN
FORE/ MAIN TOP /
MAIN 2ND/MAIN 3RD/
AFT/PORT/
STARBOARD
6 MODEL
6/ 12 /25 UP/25 DOWN/
50/30 UP/30 DOWN/60
7 TYPE
IMO /A/B/C/W
8 ON TIME
XX.XH
9 TX TIME
XX.XH
* 1 : Not shown on IMO- or A-type radar.
* 2 : No.1-4: with antenna unit
No.5-8: without antenna unit
INSTALLATION menu