FUJITSU M5000 - Manual (Page 212)

12-16 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
5. Confirm that no error has occurred.
6. Change the key position on the operator panel from Service to Locked.
7. Set up and confirm the CPU operational mode of the domain.
For more information, refer to Chapter 2, “Setting Up XSCF,” in the SPARC
Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF User’s Guide.
8. Power on all the domains.
9. Confirm that the target domain has been correctly started.
10. Confirm that no error has occurred.
XSCF> showlogs error -v
XSCF> showstatus
XSCF> poweron -a
XSCF> showlogs power
XSCF> showlogs error -v
XSCF> showstatus