2 using the prtdiag command, 1 options, Using the prtdiag – FUJITSU M5000 User Manual
Page 51: Options
Chapter 2
Fault Isolation
2-27
2.7.2
Using the prtdiag Command
The prtdiag command displays configuration and diagnostic information. The
diagnostic information identifies any failed component.
The prtdiag command is located in the /usr/platform/platform-name/sbin/
directory.
Note –
The prtdiag command might indicate a slot number different than that
identified elsewhere in this document. This is normal.
2.7.2.1
Options
describes options for the prtdiag command and how those options can
help troubleshooting.
TABLE 2-13
Options for prtdiag
Option
Description
How It Can Help
No option
Lists components.
Identifies CPU timing and PCI cards installed.
-v
Verbose mode. Displays the
time of the most recent AC
power failure and the most
recent hardware fatal error
information.
Provides the same information as no option. Additionally
lists fan status, temperatures, ASIC, and PROM revisions.