E.3 signal line configuration, Signal line configuration – FUJITSU M5000 User Manual
Page 284
Advertising
E-2
SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
E.3
Signal Line Configuration
This section describes signal definitions and electrical specifications.
FIGURE E-1
shows the signal line configuration when connected to a UPS.
FIGURE E-1
Connection with UPS
TABLE E-1
defines these signal lines.
UPS cable
UPS
Server
*BTL
*ACOFF
SG
7
6
9
5
*BPS/*UALM
1
Advertising
This manual is related to the following products: