FUJITSU SPARC M4000/M5000 - Manual (Page 36)

3-12 SPARC Enterprise M4000/M5000 Servers Installation Guide • December 2010
2. Type the showhardconf command with the -u option from the XSCF Shell.
See the Section B.2.1, “Using the showhardconf Command” on page B-2 for details.
3. Use the console command to go to the ok prompt.
XSCF> showhardconf -u
SPARC Enterprise M5000; Memory_Size:64 GB;
+-----------------------------------+------------+
| FRU | Quantity |
+-----------------------------------+------------+
| MBU_B | 1 |
| CPUM | 4 |
| Freq:2.530 GHz; | ( 8) |
| MEMB | 8 |
| MEM | 64 |
| Type:1A; Size:1 GB; | ( 64) |
| DDC_A | 4 |
| DDC_B | 2 |
| IOU | 2 |
| DDC_A | 2 |
| DDCR | 2 |
| DDC_B | 2 |
| XSCFU | 1 |
| OPNL | 1 |
| PSU | 4 |
| FANBP_C | 1 |
| FAN_A | 4 |
+-----------------------------------+------------+
XSCF> console -d 0