FUJITSU SPARC M4000/M5000 - Manual (Page 41)

4-1
C H A P T E R
4
Connecting the Domains to the
Network
This chapter discusses how to establish a network for the servers. It contains the
following sections:
■ Section 4.1, “Overview of Network Configuration” on page 4-1
■ Section 4.2, “Connecting to the Network” on page 4-1
■ Section 4.3, “Verifying the Network Connection” on page 4-2
■ Section 4.4, “Verifying Operation by Running Oracle VTS Software” on page 4-2
4.1 Overview of Network Configuration
By this point in the installation the server is up and running. The domains still need
to be connected to the network.
4.2 Connecting to the Network
The hubs, switches, and cables used to connect the networks must be supplied by the
user.
Note – Connecting the I/O units to the user’s LAN allows the domains to access the
network. If you want the domains to be isolated from the network, skip this step.