FUJITSU SPARC M4000/M5000 - Manual (Page 6)

vi SPARC Enterprise M4000/M5000 Servers Installation Guide • December 2010
3.3 Connecting the Administration Console 3–5
3.3.1 Connecting the Console 3–7
3.3.2 Initializing the XSCF Unit 3–9
3.4 Powering On the Server 3–10
3.4.1 Verifying the Configuration 3–11
3.4.2 Checking the Dual-Power Feed 3–15
3.5 Connecting Additional Peripheral Devices 3–15
4. Connecting the Domains to the Network 4–1
4.1 Overview of Network Configuration 4–1
4.2 Connecting to the Network 4–1
4.3 Verifying the Network Connection 4–2
4.4 Verifying Operation by Running Oracle VTS Software 4–2
A. System Views A–1
A.1 M4000 Server Views A–1
A.2 M5000 Server Views A–5
A.3 Operator Panel Overview A–9
B. Fault Isolation B–1
B.1 Corrective Actions to Common Problems B–1
B.2 Using the Diagnostic Commands B–2
B.2.1 Using the showhardconf Command B–2
B.2.2 Using the showlogs Command B–5
B.2.3 Using the showstatus Command B–6
B.2.4 Using the fmdump Command B–6
B.2.4.1 fmdump -V Command B–6
B.2.4.2 fmdump -e Command B–7
B.2.5 Using the fmadm faulty Command B–7
B.2.5.1 fmadm config Command B–8