GE UX-CL 220 - Manual (Page 29)

Setting the Date and Time
27
1. Ins
tal
lati
on
Setting the Date and Time
1
Press once and 3 times.
2
Press once and once.
3
Press .
4
Enter a two-digit number for the month (“01” for January, “02” for
February, “12” for December, etc.).
Example: January
•
To correct a mistake, press to move the cursor back to the mistake and
then enter the correct number.
5
Enter a two-digit number for the day (“01” to “31”).
Example: the 5
th
FUNCTION
0 1
0 5
The date and time appear
in the display and are
printed at the top of every
page you fax. Set the date
and time as shown below.
FUNCTION
STOP
1
9
4 5 6
7 8
0
2 3
Display:
The currently set date
appears (example):
Do not set the date
and time if you are
using OpenLCR!
OpenLCR
automatically sets the
date and time each
time your fax calls
OpenLCR and
receives rate data. To
ensure accurate use
of the rate data, do not
change the date and
time setting yourself.
ENTRY MODE
DATE&TIME SET
DATE 08-15-2002
DATE 01-15-2002
DATE 01-05-2002
START/MEMORY