MITSUBISHI ELECTRIC WS-48513 - Manual (Page 17)

16 17
NetCommand ® Pre-Memorized Devices
������ �������
����� �� �������� ����� ��� ��� ���������
��������
��� ������ ���
����
�����
��������
���� ��������
�����
������
������� ����������� �������
������� ��������� ��������
������� ������� �������
������ ��������� ��������
������� ��������� ������
��� ��������
��������
������� ������
������� ������
��������� ���� �
���������� �������� ������� �������� �������� ������� ������ �������
��������� ������� �������� ��������
����� ����
������� ��������
������� ����������������� ������
����� ��������
��� ���������
����� ��������
������� ����� �������� �������
���������� �������� ����
���� ��������� ��������� ����������� ��� ���������� �������
������ ��������� �������� �������� ���������
��������� ������
�������
��������
�
��������� ��
�
��������� ��
�
��
* XBox™ requires the DVD kit from Microsoft
** Playstation® 2 requires the DVD Remote Controller kit from Sony; DVD Player software disc version 2.10
Below is a list of several manufacturers devices tested and shown to be compatible with the NetCommand control
system. When you use these devices you will be able to control them without changing the setting of the remote
control from TV to another product.
NetCommand may be able to operate additional models since many manufacturers use the same control signals to
operate some or all of the models they offer. This chart lists only the models that have been tested with NetCommand.
For each manufacturer, models other than those specified above may be compatible.
If the manufacturer of the device you own is not listed below or if your device does not operate using the same remote
control as the models listed below, you should use the learning feature to add your device to the NetCommand memory.
NetCommand Pre-Memorized Devices
NOTE: There are many different types of remotes and some of them may not be compatible with the learning
feature. Bright light near the TV screen can also adversely affect the learning feature. If it is not possible to learn
a device, you will need to use the original remote control of the device, or program the TV remote to operate these
devices in the traditional manner.
The remote control signals of most audio video devices can be learned by NetCommand. However, there will be some
types of signals that cannot be learned.
For devices not listed in the table above, you can use the learning feature by selecting “Other” at the [Device] screen.
The procedure for this is outlined in the Edit NetCommand section of this book, Chapter 3.