MITSUBISHI ELECTRIC WS-48513 - Manual (Page 71)

70 71
Color Balance
Figure 26
Your Mitsubishi TV uses six colors (Magenta, Red, Yellow,
Green, Cyan and Blue) to create color balance. You may
adjust the intensity of the colors automatically or manually
(PerfectColor™) or reset them to the default settings.
Each TV input or device has a memory for PerfectColor.
Auto Color Correction
Set the Auto Color Correction option to On to optimize
color automatically and continuously. Both Manual
Color Adjustment and Reset Color options are grayed
out and unavailable when On is selected for Auto Color
Correction.
PerfectColor™ (Manual Color Correction)
Select Manual Color Balance then select PerfectColor
and press ENT(er) to display the menu for manual color
adjustment. Individual sliders for Magenta, Red, Yellow,
Green, Cyan and Blue will be displayed. The sliders have
a numeric value, where 63 is the maximum. The default
setting for each color is 31 (center). Highlighted text will
show which slider you are adjusting. Each active input
can be individually adjusted.
Press ADJUST or to navigate between colors and
ADJUST or to change the color slider settings.
The manual PerfectColor option is only available when
Auto Color Correction is turned Off.
Reset Color
Select to reset the Color Balance settings. Each active
input can be individually reset.
Advanced Menu: Advanced Convergence, Color Balance
Advanced Convergence Menu
Figure 25
After adjusting the Red Convergence and Blue
Convergence, you can fine-tune your TV by adjusting the
Red and Blue convergence at 64 individual points.
1. Move the flashing bracket to a position needing
adjustment by pressing ADJUST , , or .
2. Press ENT(er) to select the position (flashing will stop).
3. Move the Red or Blue line by pressing , , or .
4. Press ENT(er) to deselect the position (flashing will
resume), and move the brackets to the next position
needing adjustment.
5. Press VIDEO to switch between the Red and Blue lines.
A position is properly converged when all three lines
combine to appear white.
6. When completed, press MENU or HOME to save your
changes, and exit the Advanced Convergence screen.
7. Press INFO to display detailed instructions on using the
Advanced Convergence. Then press INFO or MENU to
return to the Advanced Convergence menu.
There are more than 64 line
intersections but the flashing
bracket only stops at the 64
adjustment positions.
IMPORTANT
Press INFO for help
Figure 25. Advanced Convergence Menu
Figure 26. PerfectColor Menu, Manual Color Correction