MITSUBISHI ELECTRIC WS-48513 - Manual (Page 34)

34 35
NetCommand ® Editing Guide
The easiest way to setup NetCommand is to follow the on-screen directions. For reference, below is a list of
the screens that you will use. You will find detailed information regarding each screen in the pages following
this Guide.
New Device screen
(select the type of device
to add to NetCommand)
Page 40 Figure 14
Change Device screen
(select the device to
change)
Page 44 Figure 25
Add Change
Audio Video Receiver selected
AV Receiver screen
(select manufacturer or "other" and
"Learn")
Page 37 Figure 6
VCR selected
VCR Screen
(select manufacturer
or "other" and "Learn")
Page 41 Figure 15
Cable Box elected
Cable Box screen
(select manufacturer
or "other" and "Learn")
Page 41 Figure 15
DBS, DVD, ETC. selected
Device screen
(select manufacturer
or "other" and "Learn")
Page 41 Figure 15
AV Receiver Inputs,
Input Learn and AV
Receiver Learn
screens
(See Learning Instructions
for details)
Name screen
(select name for the device)
Page 42 Figure 18
Device Learn and
Advance Learn
screens
(See Learning Instructions
for details)
RF Connection for CABLE
(only for cable box, select antenna
input used for cable box)
Page 43 Figure 21
Connection for Device
screen
(select which TV and AVR inputs
are used to connect the device)
Page 42 Figure 19
Device Learn and
Advance Learn
screens
( See Learning Instructions
for details)
Device Learn and
Advance Learn
screens
(See Learning Instructions
for details)
VCR for Recordings screen
(select this VCR for recordings and
full screen format)
Page 42 Figure 20
Monitor Out to AVR screen
(select TV monitor output that is
connected to AVR and AVR input
used)
Page 39 Figure 11
Input-DTV Connection screen
( only for Input-DTV, select signal
type connected to Input-DTV)
Page 43 Figure 23
Fixed Channel screen
(select the channel number
used by cable box)
Page 43 Figure 22
Connection for Device
screen
(select which TV and AVR inputs
are used to connect the device)
Page 42 Figure 19
Connection for Device
screen
(select which TV and AVR inputs
are used to connect the device)
Page 42 Figure 19
Name screen
(select name for the device)
Page 42 Figure 18
Name screen
(select name for the device)
Page 42 Figure 18
Name screen
(select name for the device)
Page 39 Figure 10
Input-DTV Connection screen
( only for Input-DTV, select signal
type connected to Input-DTV)
Page 43 Figure 23
Input-DTV Connection screen
( only for Input-DTV, select signal
type connected to Input-DTV)
Page 43 Figure 23
Finish screen
(confirms the settings for the device)
Page 44 Figure 27
If known
Manufacturer is
selected
If "Other" and
"Learn" are
selected
If "Other" and
"Learn" are
selected
If known
Manufacturer is
selected
If known
Manufacturer is
selected
If "Other" and
"Learn" are
selected
If known
Manufacturer is
selected
If "Other" and
"Learn" are
selected
If RF
Connection
is unchecked
If RF
Connection
is checked
If Input-
DTV is
selected
If Input-
DTV is
selected
If Input-DTV
is not
selected
If Input-
DTV is
selected
If Input-DTV
is not
selected
If Input-DTV
is not
selected