Connecting an analog vcr, continued, A/v receiver or stereo system, Composite video or s-video and audio connections – MITSUBISHI ELECTRIC WS-48513 User Manual

Page 21: Figure 8, Figure 7

Advertising

A/V Receiver or Stereo System

Figure 8

1. Connect a set of audio cables from the Monitor

OUTPUT AUDIO 2 on the back of the TV to the TV

AUDIO INPUT on the back of the A/V Receiver. The

red cable connects to the R (right) channel and the
white cable connects to the L (left) channel.

When you connect a digital A/V Receiver with Dolby

Digital™ surround sound:

2. Connect one end of the digital audio cable supplied

with the TV to the DIGITAL AUDIO OUTPUT on the
back of the TV (connect the end of the cable with
the ferrite or plastic cylinder). Connect the other end
to the COAXIAL DIGITAL INPUT on the back of the

A/V Receiver. Check the Owner’s Guide for the A/V

Receiver for information concerning the use of the
digital input and switching between the digital sound
and analog stereo sound from the TV.

Composite Video or S-Video and Audio

Connections

Figure 7

1. Connect a video cable from VIDEO OUT on the VCR

back panel to VIDEO INPUT 1 on the TV back panel.

Note: If you have an S-VHS VCR, follow the same

steps using the S-Video terminals on the VCR and TV

(in place of the composite terminals).

2. Connect a set of audio cables from AUDIO OUT on the

VCR back panel to AUDIO INPUT 1 on the TV back

panel. The red cable connects to the R (right) channel

and the white cable connects to the L (left) channel. If

your VCR is mono (non-stereo), connect only the white

(left) cable.

Note: Step 2 allows the use of the TV speakers with

the VCR.

OUT

Antenna

AUDIO OUT

AUDIO IN

VIDEO OUT

(Y/C)

MONITOR

VCR back panel

If your VCR
has a video
channel or
RF ON/OFF
switch,
set to OFF.

Attach

only

one

cable

type

White

Red

(S-Video
recommended
if available)

White

Red

��

��
��

��

��
��

��

��
��

�

��
��
��
��
��
��
��

��
��
��
��
��

��

��
��

��

��
��

��

�

��

�

��

�

��

�
�

��

�

��

�

��

�

��

� ��

��

��
��

��

Connecting an Analog VCR, continued

Figure 7. Adding compositve Video or S-Video with
Audio Connections

Figure 8. Connecting an A/V Receiver

Connecting an Audio/Video Surround Sound Receiver or
Stereo System

Advertising

This manual is related to the following products:

WS-55513, WS-65513, WS-73513, WS-48613, WS-55613, WS-65613, WS-65713, WS-73713, WS-55813, WS-65813

Popular Brands

Popular manuals