Playback, Turning the power on direct playback – Marantz BD8002 User Manual

Page 17

Advertising
background image

14

Playback

ENGLISH

ENGLISH

Playback

Turning the power off

Press <ON/STANDBY> or [POWER OFF].
• The power is set to the standby mode.
Press <ON / OFF> .
• The power indicator turns off, and so does the power.

A

[U / V / Y / Z]

C

[POWER ON]

B

[ENTER]

A

B

C

<ON/STANDBY>

<ON / OFF>

[POWER OFF]

About the button names in this explanation

< >: Buttons on the main unit
[ ] : Buttons on the remote control

Button name only:

Buttons on the main unit and remote control

Turning the Power On

1

Press <ON / OFF>.
The power indicator lights red and the power is set to
the standby mode.

2

Press <ON/STANDBY> or [POWER ON].
The power indicator lights green and the power turns
on.

Note

• Power continues to be supplied to some of the circuitry even

when the power is in the standby mode. When leaving home
for long periods of time or when traveling, either press
<ON / OFF> to turn off the power, or unplug the AC cord
from the AC outlet.

Direct Playback

1

Turn on the power of this unit. (Refer to “Turning
the Power On” on this
page.)

2

Turn on the display device and select the
appropriate input on the device to which the unit
is connected.

3

Press A to open the disc tray.

BDAV DVD-V DVD-VR

CD

BD-V

4

Place the disc on the disc tray with its label side
facing up.

5

Press A to close the disc tray.

Some discs may start playback automatically.

6

Press B to start playback.
For many of BD-video and DVD-video, a menu screen
may appear.
In this case, use [U / V / Y / Z] to select the desired
item, then press [ENTER].

7

Press C once to stop playback temporarily.
Refer to “Resume Playback” on page 16.
To eject the disc:
Press A to open the disc tray, then remove the disc
before turning off the unit.

Note

may appear at the top-right on the screen when the

operation is prohibited by the disc or this unit.

• During the playback of 2-layered disc, pictures may stop for a

moment. This happens when the 1st layer switches to the
2nd layer. This is not a malfunction.

• The operation may vary when you play back BD/DVD with

disc menu. Refer to the manual accompanying the disc for
details.

Align the disc to the
disc tray guide.

It may take a while to load

the disc.

E5E30UD_EN.book Page 14 Thursday, May 22, 2008 3:43 PM

Advertising