Multi-Tech Systems RF802EW - Manual (Page 22)

22
Chapter 3 - Software Installation and Configuration
IP Routing (NAT Enabled) and IP Routing (NAT Disabled)
If you select IP Routing for the asynchronous port, the Setup Wizard: IP Routing dialog box
displays.
Enter the information required to dial-up and login to your ISP’s remote server:
Telephone Number
Enter the phone number used to dial your remote server (ISP).
Note: If you must dial a number to get an outside line (for example, “9”, or “0”), enter the required
number plus a “w”(wait) or a comma in the Telephone box (for example, 9w555-2323 or
9,,5552323). Each comma provides a 3-4 second delay.
User Name
Enter the User Name for your remote server or ISP account.
Password
Enter the Password for your remote server or ISP account.
Password Verification
Re-enter the password for your remote account.
Click Next.
12. The Setup Wizard: DNS IP Address dialog box displays.
Enter your ISP’s DNS Server IP address. If you are not sure of the IP address, contact your ISP.
Refer to the Glossary in the User Guide for more information about the DNS Server.
Click Next.