Multi-Tech Systems RF802EW - Manual (Page 90)

90
Chapter 7 - LAN Client Settings
Adding TCP/IP (Unix Server Connection)
Windows 95/98/NT:
1.
In the Network dialog box, Configuration tab, click Add.
2. Select Protocol and click Add.
3. The Select Network Protocol dialog box is displayed. In the Manufacturers list [Win95 only],
select Microsoft. In the Network Protocols list, select TCP/IP [Win95/98] or TCP/IP Protocol
[WinNT only].
[Note: Windows NT workstation has no Manufacturers list.]
Win95/98 WinNT
4. Click OK twice to return to, and then close, the Network dialog box.
Set Up Properties of Components (Unix Server Connection)
Dial-up Adapter
Windows 95/98:
1.
In the Network dialog box, Configuration tab, select the TCP/IP - Dial-up adapter.
2. Click Properties. The TCP/IP Properties dialog box opens.
3. Ensure that Obtain an IP Address Automatically is selected. (It’s the default.)
4. Click OK to close the TCP/IP Properties dialog box.
Note: You must restart your machines to enable the new settings.