Save settings to file, Load settings – Multi-Tech Systems RF802EW User Manual
Page 55
55
Chapter 5 - RouteFinder Manager
Note: Entering a password is strongly recommended to protect your RouteFinder from
unauthorized reconfiguration. If you enter a password, ensure you have selected something that
will be easy to remember or write it down and store it in a safe location. If you have completely
forgotten your password, contact Multi-Tech Technical Support for assistance. Refer to Chapter
10 in this User Guide for more information about our Technical Support services.
2.
Click OK.
Save Settings to File
The Save Settings to File option allows you to save your settings to a file. This option provides a
method for backing up your system configuration so that it can be used in the event your settings
become accidently deleted. This option can also be used if you would like to have more than one set
of settings for your RouteFinder.
1.
From the main Manager dialog box, click Save Settings to File.
2.
The Save Settings to File dialog box displays.
To save your settings to a file:
1.
In the File Name box, enter the full path of the file containing the settings you want to use or click
then navigate to and select the file. You can save a copy of the file in a different location
by changing the path.
2.
Click OK to save the settings to the file.
Load Settings
The Load Settings option allows you to load either the default settings of your network device or to
load settings previously saved to a file.
1.
From the main Manager dialog box, click Load Settings.
2.
The Load Settings dialog box displays.
3.
To return the RouteFinder to factory default settings, select Load Default Setting.
4.
To load a configuration from a file, select Load Settings From File.
5.
In the File Path box, enter the name of the file containing the settings you would like to use or