Multi-Tech Systems RF802EW - Manual (Page 56)

56
Chapter 5 - RouteFinder Manager
click then navigate to and select the file.
6. Click OK to load and apply the settings to the RouteFinder.
Upgrade Firmware
Warning: Upgrade the firmware of your RouteFinder RF802EW only under the advice and direction
of the Multi-Tech Technical Support Group. Improperly upgrading the RF802EW may disable the
device!
The Upgrade Firmware options allow you to upgrade your RF802EW firmware. The Upgrade
Firmware option upgrades the firmware of your RF802EW, not the RouteFinder Manager or Monitor
software.
1. From the main Manager dialog box, click Upgrade Firmware.
2. The Upgrade Firmware dialog box displays.
To Upgrade your firmware:
1. Download the latest firmware from the Multi-Tech System’s web site at www.multitech.com.
2. Copy the firmware to the directory containing the RouteFinder Manager program files. Refer to
the default Firmware File Directory box to determine the location of the files on your system.
3. Enter the location of the new firmware file in the Firmware File Directory box. RouteFinder
Manager will automatically detect the new firmware file name and display it in the Firmware File
Name box. The version number of your firmware will display in the Firmware File Version box.
4. Click Upgrade to upgrade your firmware.
5. A message displays stating the upgrade has started.
6. After several minutes, an informational dialog box displays indicating the upgrade was
successful.
7. Click OK.
8. From the main Manager dialog box, click Save and Exit.
9. Click Yes to restart the RouteFinder using the new firmware version.