Chapter 6 - routefinder monitor, Routefinder monitor, Running routefinder monitor – Multi-Tech Systems RF802EW User Manual
Page 59: Refresh device list, Test connection
59
Chapter 6 - RouteFinder Monitor
RouteFinder Monitor
RouteFinder Monitor is a utility that provides both monitoring and troubleshooting functions.
Running RouteFinder Monitor
1.
Click on the RouteFinder Monitor icon, or select Start | Programs | RouteFinder Manager |
RouteFinder Monitor.
2.
The RouteFinder Monitor dialog box displays.
Note: If you receive a message stating “Device is not found”, refer to the Troubleshooting
chapter in this User Guide.
Refresh Device List
Click Refresh Device List from the main RouteFinder Monitor dialog box to display a list of network
devices in the Available Devices window.
Test Connection
The Test Connection option tests your connection settings and assist you in determining if problems
are due to the modem, the RouteFinder, or an incorrect setting. Test Connection uses the attached
modems to dial-up the remote server (ISP) and establish a connection.
1.
From the main RouteMonitor dialog box, click Test Connection to begin testing.
2.
The Test Connection dialog box displays.
3.
Select Connect Port 1 to test the WAN connection, or Connect Port 2 to test the Async
connection.