Multi-Tech Systems RF802EW - Manual (Page 54)

54
Chapter 5 - RouteFinder Manager
Refresh Device List
1. From the main Manager dialog box, click Refresh Device List to search the LAN for available
network devices and display them in the Available Devices list.
Note: If a device does not appear in the list, click Refresh Device List again to determine if the
device will appear on the list. If the device still does not appear, ensure that all cables are
correctly connected and that the power to the RF802EW is turned on. If the device still does not
appear in the list, refer to the Troubleshooing chapter of this User Guide.
Device Name and Password
1. From the main Manager dialog box, click Device Name and Password. You may use the
default device name or use this dialog box to change the name or add a password for your
device.
Device Name
Displays the name of your network device. To change the name, simply enter a new name. If
you are connecting to an ISP via cable modem or DSL, and your ISP requires you to enter a
computer name, you may use the device name that you entered here.
Domain Name
Enter your local network domain name.
Device Password
The RouteFinder manager does not come with a default password. If you enter a password, you
will be prompted to enter the password each time you want to configure your network device. To
enter a Password, type your password in the Device Password box, then re-enter your
password in the Password Verification box.