Event messages, Tcp/ip tab, Tcp/ip tab time tab – Multi-Tech Systems RF802EW User Manual
Page 62
62
Chapter 6 - RouteFinder Monitor
3.
Enter each computer’s IP Address and associated User Name in the provided fields.
4.
Click Add after each IP address and name have been added to the list.
5.
When all addresses have been added, click OK.
Event Messages
Event Messages are displayed in the lower half of the RouteFinder Monitor display. Event
Messages provide information about the communication occurring between your network device,
ISDN TA/modem and the remote server (ISP).
To assist you in troubleshooting, you may point and click on any event message to bring up a help
screen.
TCP/IP Tab
The TCP/IP tab displays all TCP/IP requests made by your network device. You may select to view
TCP/IP sessions for the WAN Ethernet or the Async Port.
1.
The TCP/IP tab is the default tab displayed in the RouteFinder Monitor dialog box. If it is not
displayed, click the TCP/IP
tab.
Note: The TCP/IP sessions displays the history of the TCP/IP session through the selected port.
The TCP/IP information presented does not represent the current status of the TCP/IP session.
The TCP/IP tab displays the following information:
Date/Time:
Indicates the date the request was made.
Port:
Indicates the port you are viewing.
Type:
Displays the type of request being made.
Local IP:
Indicates which IP address you have requested information from.
Remote IP:
Indicates which IP address was requested.
Port Number:
Indicates which TCP/IP port was requested.
2.
To exit RouteFinder Monitor, close the window.