Multi-Tech Systems RF802EW - Manual (Page 40)

40
Chapter 5 - RouteFinder Manager
Remote Access Settings
1. From the General Settings dialog box, select the Remote Access option and click Remote
Access Settings.
2. The Remote Access Settings dialog box displays.
Enter the following:
IP Assigned Method for Remote Clients
A remote client must have an IP address to connect to the network. IP addresses may be
assigned automatically from a designated IP address pool using DHCP, or the IP address may be
manually assigned.
Assign an IP Address Automatically
The DHCP feature will issue the remote site user an IP address automatically if the DHCP
function is enabled. If DHCP is disabled, the device will automatically search for a DHCP server
and request an IP address for the remote client.
Assign an IP address manually
Enter an IP address for the remote client.
Network Protocols
You must select the network protocols you would like to enable for the dial-in service. The
default enables both TCP/IP and IPS/SPX. If you do not need both protocols, you may disable
one of them. If you are connecting to a Netware Server, IPX/SPX must be enabled.
IPX/SPX Frame Type
The RF802EW can automatically detect what kind of IPX/SPX frame type you are using. You
may manually select a frame type by using the list box.
Remote Client Authentication
Remote authentication settings allow you to specify how you would like to authenticate remote
users. You may select Use Local Client List or Use RADIUS Authentication (refer to Remote
Connection Authentication Settings in this chapter for more information). Choosing RADIUS
configuration allows you to use the user information (such as user name, password, and IP
address) stored on a separate RADIUS server on the network.
3. Click OK when complete.