Multi-Tech Systems RF802EW - Manual (Page 34)

34
Chapter 5 - RouteFinder Manager
General Settings
After selecting your device from the Available Devices list, click General Settings to view or change
all of the major network settings for the RF802EW including LAN and WAN Ethernet segment
settings, DNS information, IP Routing, and Remote Access settings. Most of the settings here were
entered in Setup Wizard. However, some important settings can be entered only in RouteFinder
Manager.
If Enable Access Point function only is selected, the user can set the Access Point’s IP as manual
settings or acquire an IP address from a DHCP server. Enable Access Point + Rounter function is
the default option.
Click Click here to Setup Router Settings to select Router settings for your RouteFinder.
The General Settings dialog box contains settings for IP information for LAN Ethernet Segment and
WAN Ethernet Segment, DNS number, IP Routing settings, and Remote Access settings.