Multi-Tech Systems MT2834BLR - Manual (Page 44)

44
Chapter 4 - Commands
DEFAULT: n/a
DESCRIPTION: Callback password with xxxxxx being callback password
and yy being the memory location. Callback password
xxxxxx must start with a non-numeric character and upper/
lower case sensitive. Callback password xxxxxx must be a
mini mum of 6 and maximum of 10 characters. yy memory
locations are from 0 to 29. Must T (tone) dialing in string.
COMMAND: + - Dxxxxxx???Nxx
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Callback Phone Numbers xxxxxx with the + preceding the
phone number indicating the callback modem phone
number for the corresponding password at the same
memory location. The (-) preceding the phone number
enables direct entry when the caller uses the correct
password without the callback modem having to return the
call. The ??? entry at the end of the phone number
represents an extension added to the main phone number.
The Nxx is the memory location of the callback phone
number and password.
COMMAND: #Pn
VALUES: n= 0, 1, or 2
DEFAULT: #P0
DESCRIPTION: Parity of the prompt messages sent by the callback
modem.
#P0 is no parity.
#P1 is odd parity.
#P2 is even parity.
COMMAND: #RCBNxx
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Erases the callback password stored at memory location
xx. Memory locations are 0 to 29.
COMMAND: #RDNxx
VALUES: n/a
DEFAULT: n/a
DESCRIPTION: Erases the callback phone number stored at memory
location xx. Memory locations are 0 to 29.