Chapter 4 - commands – Multi-Tech Systems MT2834BLR User Manual
Page 47
47
Chapter 4 - Commands
COMMAND:
CSPs
VALUES:
n/a
DEFAULT:
n/a
DESCRIPTION:
The CSP command will change the serial baud rate of your
modem by entering CSPsssss where sssss can equal:
CSP0300 - 300 bps
CSP1200 - 1200 bps
CSP2400 - 2400 bps
CSP4800 - 4800 bps
CSP9600 - 9600 bps
CSP19200 - 19200 bps
CSP38400 - 38400 bps
CSP57600 - 57600 bps
CSP115200 - 115200 bps
COMMAND:
CRNdd
VALUES:
n/a
DEFAULT:
n/a
DESCRIPTION:
Dials phone number dd where dd can be up to 20
characters (0 through 9, *, #, P, T and :). Phone number is
checked against the Delayed and Forbidden Number lists
before dialed.
COMMAND:
CRIdd;nn
VALUES:
n/a
DEFAULT:
n/a
DESCRIPTION:
Dials dd same as CRN Command and ignores nn
identification string.
COMMAND:
DIC or CIC
VALUES:
n/a
DEFAULT:
n/a
DESCRIPTION:
The disregard or connect to incoming calls commands are
used for auto-answer operations. DIC stops the modem
from answering incoming calls. CIC causes the modem to
answer incoming calls.