Multi-Tech Systems MT2834BLR - Manual (Page 68)

68
Chapter 6 - Warranty and Service
and select the rate you want to program at. Hit ESC when
finished.
5. Highlight the "Select File to Program" option in the MAIN
MENU. Highlight the .HEX file. Hit ESC when finished.
6. Highlight "Program Firmware" option in the MAIN MENU. When you are
prompted to confirm the file to program, press "Y".
7. If you need more assistance programming FLASHPRO, then contact our
tech support department.
6.5 Safety Warnings
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
4. Use caution when installing or modifying telephone lines.
5. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electrical shock from
lightning.
6. Do not use the telephone to report a gas leak in the vicinity of the leak.
7. Ports which are connecting to other apparatus are defined as SELV.
To ensure conformity with EN 41003, ensure that these ports are only
connected to the same type on other apparatus.