Multi-Tech Systems MT2834BLR - Manual (Page 53)

53
Chapter 4 - Commands
TERSE VERBOSE
0
OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
5 * CONNECT 1200
6 NO DIALTONE
7 BUSY
8 NO ANSWER
9 * CONNECT 2400
11 * CONNECT 4800
12 * CONNECT 9600
13 * CONNECT 14400
19 * CONNECT 19200
21 * CONNECT 21600
24 * CONNECT 24000
26 * CONNECT 26400
28 * CONNECT 28800
31 * CONNECT 31200
33 * CONNECT 33600
* With MNP error correction on, RELIABLE (or R) is added to these result codes.
With LAP-M error correction on, LAP-M (or L) is added to these result codes.
With data compression on, COMPRESSED (or C) is added. (Note these
"Extended" Result Codes are displayed when your modem is set-up to do so
with an X1, X2, X3, or X4 command.)
Table 4-2: &Q1 "Standard AT" Result Codes