Chapter 4 - commands – Multi-Tech Systems MT2834BLR User Manual
Page 49
49
Chapter 4 - Commands
S4
Line Feed Character
Unit:
ASCII Character
Range:
0-127
Default:
10
Description:
Defines the character recognized as LINE FEED.
S5
Backspace Character
Unit:
ASCII Character
Range:
0-127
Default:
8
Description:
Defines the character recognized as BACKSPACE.
S6
Wait Time for Dial Tone
Unit:
1 second
Range:
2-255, 4-255**
Default:
2, 4**
Description:
Sets the time the modem waits after the RETURN key is
pressed before executing a dial command.
S7
Time for Carrier (Abort Timer)
Unit:
1 second
Range:
1-255, 1-45*
Default:
45
Description:
Defines the Abort Timer (lack of carrier) delay time.
S8
Pause Time for Comma
Unit:
1 second
Range:
0-255, 4-255**
Default:
2, 4**
Description:
Sets the length of the pause caused by a comma inserted
in a dialing commarnational and DOC units
S9
Carrier Detect Response Time
Unit:
100 mSec.
Range:
1-255
Default:
6
Description:
Sets the time delay for when the modem first detects a
valid incoming carrier signal and when the modem turns on
its Carrier Detect circuit.
** Value for International Units only