Inter-Tel SoftPhone 8601 - Manual (Page 61)

55 Inter-Tel ® Model 8601 SoftPhone for Pocket PC User Guide
Q9. What PDAs support the Model 8601?
A9. The Model 8601 is currently supported by the following PDAs:
• Compaq
®
iPAQ H3970, 400 MHz
• Compaq iPAQ H3875, 400 MHz
• Dell Axim
™
X5, 400 MHz
• Dell Axim X30, 624 MHz
• Hewlett Packard
®
iPAQ H5550, 400 MHz
• Hewlett Packard iPAQ H5450, 400 MHz
• Hewlett Packard iPAQ h4150, 400MHz
• Hewlett Packard iPAQ h4350, 400 MHz
• Hewlett Packard iPAQ PocketPC hx4700, 624MHz
• Hewlett Packard iPAQ PocketPC h6315
• Toshiba
®
E800, 400MHz
Q10. If I call someone who is in DND, will I see their DND message?
A10. Yes. The display will show “Busy...”
Q11. How many concurrent calls can my Model 8601 handle?
A11. Two. You can use the SWAP icon to toggle between calls (see page 17 ).
Q12. How many callers can be in a conference call?
A12. You can establish a conference call with up to three people (including yourself). See
page 19 .
Q13. How many calls are listed in the call log? Does it list incoming and outgoing calls? Will I be
able to call back an incoming call?
A13. The Call Log can contain up to ten received, ten outgoing, and ten missed calls (30
calls total). You will be able to call any of the numbers from within the Call Log (see
page 12 ).
Q14. Can I transfer a call to an outside number?
A14. Yes. The Model 8601 does not restrict this. Remember that all outside calls require
you to dial 8 before you dial an outside number.
Q15. How many devices can share an extension?
A15. Up to five SIP endpoints can share the same extension (see page 17 ).
Q16. If I have a shared extension, can I put the call on hold at a Model 8601 and then pick it up at
the other SIP endpoint and vice versa?
A16. SIP device on a shared extension cannot see a call placed on hold by another device.