Your first contact – Icom IC-U82 User Manual
Page 10
III
QUICK REFERENCE GUIDE
■
Your first contact
Now that you have your IC-V82/U82 ready, you are excited
to get on the air. We would like to walk you through a few
basic operational steps to make your first “On The Air” use an
enjoyable experience.
D
About default setting
The
[VOL]
control function can be exchanged with
[
Y
Y
]
/
[
Z
Z
]
keys function in
INITIAL SET MODE
. However, in this QUICK
REFERENCE, the factory default setting (
[VOL]
controls
audio output level) is used to simplify instructions.
D
Basic operation
1. Turning ON the transceiver
Although you have purchased a brand new transceiver, some
settings may be changed from the factory defaults because
of the Quality Control process. Resetting the CPU is neces-
sary to start from factory default.
➥ While pushing
[MONI]
and
[D•
CLR
]
, push and hold
[PWR]
for
1 sec. to reset the CPU and turn
power ON.
2. Adjusting audio output level
➥ Rotate
[VOL]
to set the desired
audio level.
3. Adjusting the squelch level
➥ While pushing and holding
[MONI]
, push
[
Y
Y
]
or
[
Z
Z
]
to set the
squelch level.
4. Tune the desired frequency
The up/down keys,
[
Y
Y
]
/
[
Z
Z
]
, will
allow you to tune to the frequency
that you want to operate on. Page 14
will instruct you on how to adjust the
tuning step size.
➥ Push
[
Y
Y
]
or
[
Z
Z
]
to adjust the fre-
quency.
PWR
MONI
CLR
D
MONI
[VOL]