Cpu reset, Partial reset – Icom IC-U82 User Manual
Page 82
70
12
OTHER FUNCTIONS
■
CPU reset
The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial resetting is also available. See right for details.
IMPORTANT!:
Resetting the transceiver
CLEARS
all memory information
and initializes all values in the transceiver.
➥ While pushing
[MONI]
and
[D•
CLR
]
,
push and hold
[PWR]
for 1 sec. to
reset the CPU.
• “CLEAR” indicates, then initial display
appears.
■
Partial reset
If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing
the memory contents, a partial resetting function is available
for the transceiver.
➥ While pushing
[D•
CLR
]
, push and
hold
[PWR]
for 1 sec. to partially
reset.
AT
POWER ON
AT
POWER ON
PWR
MONI
CLR
D
PWR
CLR
D