Emr communication, Pocket beep operation – Icom IC-U82 User Manual

Page 60

Advertising
background image

48

11

DIGITAL MODE OPERATION

EMR communication

The EMR communication mode is available for digital mode
operation. In the EMR communication mode, no call sign set-
ting is necessary. When an EMR communication mode sig-
nal is received, the audio (voice) will be sound in the specified
level (‘12’ level) even the volume setting is set to any level.

q Set the desired frequency then push

[A•

FUNC

]

and

[0•

OPT

]

to enter

OPTION SET MODE

.

w Push

[

Y

Y

]

or

[

Z

Z

]

several times to select the EMR setting,

then rotate

[VOL]

to turn the EMR setting ON.

• “EmR” appears.

e Push

[

ENT

]

(or

[D•

CLR

]

) to exit

OPTION SET MODE

, then

operate the transceiver normal way.

r To cancel the EMR communication mode, push

[A•

FUNC

]

and

[0•

OPT

]

, then rotate

[VOL]

to turn OFF.

Pocket beep operation

This function uses a digital code/call sign for calling and can
be used as a “common pager” to inform you that someone
has called while you were away from the transceiver. The dig-
ital code or call sign squelch does not function while in a low-
speed data communication.

D

D

Waiting for a call from a specific station

q Set the operating frequency.
w Program the digital code or call sign.

• See p. 53, “Digital code setting” or p. 42 “Call sign program-

ming.”

e Push

[A•

FUNC

]

and

[1•

TONE

]

one or more times until “ ”

or “ ” appears in the function display.

• “ ” for call sign squelch; “ ” for digital code squelch operation.

r Push

[A•

FUNC

]

, then push

[2•

P

.

BEEP

]

to activate the pocket

beep function.

• “ ” appears.

t When a signal with the matched call sign/digital code is re-

ceived, the transceiver emits beep tones and blinks “ .”

• Beep tones sound for 30 sec. and “ ” blinks. To stop the beeps man-

ually, push any key. “ ” continues blinking until step y is operated.

y Push

[PTT]

to answer.

• “ ” disappears and cancels the pocket beep function automati-

cally.

u To cancel the call sign/digital code squelch, push

[A•

FUNC

]

and

[1•

TONE

]

one or more times until or “ ” or “ ” disap-

pears.

Advertising
This manual is related to the following products: