Initial set mode – Icom IC-U82 User Manual
Page 75
63
12
OTHER FUNCTIONS
12
■
INITIAL SET MODE
The
INITIAL SET MODE
is accessed at power on and allows you
to set seldom-changed settings. In this way, you can “cus-
tomize” transceiver operations to suit your preference and op-
erating style.
D
D
Entering INITIAL SET MODE
q While pushing and holding
[
Y
Y
]
and
[
Z
Z
]
, turn power ON.
w Push
[
Y
Y
]
or
[
Z
Z
]
to select the desired item.
e Rotate
[VOL]
to select the condition or value.
• To exit
INITIAL SET MODE
, push
[
✱
•
ENT
]
(or
[D•
CLR
]
).
D
D
Key-touch beep
Turns key-touch beep emission ON (Beep level 1 to 3) or
OFF.
(default: 3)
NOTE:
The pocket beep level (Beep level 1 to 3 or OFF)
also changes as this setting.
D
D
Time-out timer
To prevent accidental prolonged transmission, etc., the trans-
ceiver has a time-out timer. This function cuts a transmission
OFF after 1–30 min. of continuous transmission. This timer
can be cancelled.
• tOt.OF
: The time-out timer is turned OFF. (default)
• tOt. 1–30: The transmission is cut OFF after the set period
elapses.
[VOL]
ENT
PWR
Enter
Exit
Set
AT
POWER ON