Icom IC-U82 - Manual (Page 80)

68
12
OTHER FUNCTIONS
D D S-meter squelch
Sets S-meter squelch threshold level from OFF (default) and
S1–S3.
This setting allows you to set a minimum signal level needs to
open the squelch.
D D ALC function
Sets the ALC (automatic Level Control) function ON and OFF
(default).
The ALC function reduces the microphone gain automatically
when the transmission audio is distorted.
D D Battery protection function
Sets the Battery protection function from LI (Li-Ion) and OFF
(default).
LI(Li-Ion):
➥ The transceiver does not memorized the transceiver
ON/OFF condition when battery is detached, and automat-
ically returns to OFF condition even if you detach the bat-
tery with the transceiver ON condition. You are required to
turn ON the transceiver by pushing
[PWR] for every bat-
tery attach.
➥ Beep sounds when the attached battery is exhaustion.
• The battery must be charged presently.
OFF : The transceiver memorizes the transceiver ON/OFF
condition when battery is detached.
NOTE : This item MUST be set “LI” (Li-Ion) when the at-
taching battery is BP-211N (Li-Ion).