Panel description – Icom IC-U82 User Manual
Page 17
5
2
PANEL DESCRIPTION
2
[3•
T
.
SCAN
]
➥ Input digit “3” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, starts tone scanning.
(pgs. 19, 37)
[4•
DUP
]
➥ Input digit “4” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, selects duplex function
(–duplex, +duplex, simplex). (p. 17)
[5•
SCAN
]
➥ Input digit “5” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, starts scanning. (p. 30)
[6•
SKIP
]
➥ Input digit “6” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, sets and cancels skip
setting for memory scan during memory mode.
(p. 32)
[7•
PRIO
]
➥ Input digit “7” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, starts priority watch.
(p. 32)
[8•
SET
]
➥ Input digit “8” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, enters into
SET MODE
.
(p. 59)
[9•
H/M/L
]
➥ Input digit “9” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, switches transmit
power between high, middle and low output
power. (p. 15)
[0•
OPT
]
➥ Input digit “0” during frequency input, memory
channel selection, etc. (pgs. 13, 21)
➥ After pushing
[A•
FUNC
]
, selects an optional
function mode, such as pager, code squelch or
digital operation. (pgs. 40, 42)
[#•
BANK
]
After pushing
[A•
FUNC
]
, enters a memory bank
selection. (p. 25)
[
✱
•
ENT
]
➥ Sets the frequency even if the full 6 digits of
frequency have not been entered. (p. 13)
➥ After pushing
[A•
FUNC
]
, switches key lock func-
tion ON and OFF when pushed and held for 1
sec. Lock all keys, except
[PWR]
,
[PTT]
,
[MONI]
and audio level adjustment. (p. 16)
ENT
BANK
OPT
0
H/M/L
9
SET
8
PRIO
7
SKIP
6
SCAN
5
DUP
4
T.SCAN
3