Icom IC-U82 - Manual (Page 25)

13
4
BASIC OPERATION
3
4
■
Power ON
➥ Push and hold [PWR] for 1
sec. to turn power ON.
■
VFO mode selection
The transceiver has 2 basic oper-
ating modes: VFO mode and
memory mode.
➥ Push [D• CLR ] to select VFO
mode.
■
Setting a frequency
D Via the keypad
q Push [D• CLR ] to select VFO mode, if necessary.
w To enter the desired frequency, enter 6 digits starting from
the 100 MHz digit.
• Entering three* to five digits then pushing [ ✱ • ENT ] will also
set the frequency. (*Some versions only requires two digits.)
• When a digit is mistakenly input, push [D. CLR ] to abort input.
• Example 1— when entering 145.525 MHz
Push
• Example 2— when entering 144.800 MHz
P.BEEP
2
DUP
4
DUP TONE
4 1
SCAN
5
SCAN
5
SCAN
5
Push
DUP TONE
4 1
OPT
0
SET
8
ENT
CLR
D
Push and
hold for 1 sec.
PWR