Transferring bank contents – Icom IC-U82 User Manual
Page 38
26
6
MEMORY/CALL OPERATION
■
Transferring bank contents
Contents of programmed memory banks can be cleared or
transferred to another bank.
INFORMATION:
Even if the memory bank contents are
cleared, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or erased.
➥ Push
[C•
MR
]
to select memory mode.
➥ Push
[A•
FUNC
]
and
[#•
BANK
]
,
then rotate
[VOL]
to select the
desired memory bank.
• Bank indicator blinks.
➥ Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to
select the bank then push
[
Y
Y
]
and
[
Z
Z
]
to select the desired con-
tents.
• Bank indicator stops blinking.
w Push
[A•
FUNC
]
and
[8•
SET
]
to enter
SET MODE
.
e Push
[
Y
Y
]
or
[
Z
Z
]
several times until
“bAk” appears.
• Bank indicator appears.
r Rotate
[VOL]
to select the desired
bank to receive the transferred infor-
mation or erase the bank contents.
• Select “– –” indication when erasing the
contents from the bank.
t Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to transfer or erase, and re-
turn to regular memory mode.
y Repeat steps q to t for transferring or erasing an an-
other bank’s contents.
[VOL]
ENT
FUNC
A
SET
8
[VOL]
ENT
FUNC
A
BANK