Icom IC-U82 User Manual
Page 37
25
6
MEMORY/CALL OPERATION
6
■
Memory bank selection
The IC-V82/U82 has a total of 10 banks (A to J). Each mem-
ory channel, 0 to 199, may be assigned to one of the banks
for easy memory management.
q Push
[C•
MR
]
to select memory mode.
w Push
[A•
FUNC
]
and
[#•
BANK
]
to enter
memory bank selection.
• Bank indicator blinks.
e Rotate
[VOL]
to select the desired
bank, A to J.
• Banks that have no programmed con-
tents are skipped.
r Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to se-
lect the bank.
• Indicator stops blinking.
t Push
[
Y
Y
]
or
[
Z
Z
]
to select the channel in the bank.
• No channel numbers are displayed for memory bank operation.
y To return to regular memory condition, push
[A•
FUNC
]
and
[#•
BANK
]
to enter memory bank mode, then push
[
✱
•
ENT
]
(or
[D•
CLR
]
).
■
Memory bank setting
q Push
[C•
MR
]
to select memory mode, then select the de-
sired memory channel via
[
Y
Y
]
or
[
Z
Z
]
.
w Push
[A•
FUNC
]
and
[8•
SET
]
to enter
SET MODE
.
e Push
[
Y
Y
]
or
[
Z
Z
]
several times until
“bAk” appears.
• “– –” indication blinks as follows.
r Rotate
[VOL]
to select the desired
bank.
t Push
[
✱
•
ENT
]
(or
[D•
CLR
]
) to assign the channel to the
bank and return to regular memory condition.
y Repeat steps q to t to assign another memory channel
to the same or another bank.
NOTE:
Display type setting (pgs. 16, 65) in
INITIAL SET
MODE
must be selected “FR,” otherwise the memory bank
operation cannot be performed.
[VOL]
ENT
FUNC
A
SET
8
MR
C
Push
[VOL]
ENT
FUNC
A
BANK
MR
C
Push