JVC BR-DV600AE - Manual (Page 25)

E-25
Using the wireless remote controller
Maximum distance to the sensor
of the unit : 6m
Angle
: within 30˚
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY PAUSE
REW STOP FF
DVCAM NTSC PAL REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL. REMOTE SEL. MIC
SERIAL
WIRELESS 9PIN
LINE
DV Y/C
Sensor for the wireless remote controller
Before using the wireless remote controller,
please set the REMOTE SEL. switch to
“WIRELESS”.
Ⅵ Operable scope of the wireless remote controller
Mini
PROFESSIONAL
SET
MENIU
EJECT
REC PLAY PAUSE
REW STOP FF
DVCAM NTSC PAL REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL. REMOTE SEL. MIC
SERIAL
WIRELESS 9PIN
LINE
DV Y/C
Sensor for the wireless remote controller
About 30˚
About 30˚
Not further than 6m
Notes
• The remote controller will hardly work if there are obstructive objects between the remote control
sensor of the main unit and the remote controller.
• The remote controller will hardly work when sunlight or strong light shines directly on the remote
control sensor of the main unit.
• Do not press the buttons on the main unit and the remote controller simultaneously for this may
cause malfunction.
Caution on using the wireless remote controller
When more than 2 VTRs are being individually operated in the same place, please ensure that the
front panel REMOTE SEL. switches of all VTRs except the one to be manipulated, are NOT set at
“WIRELESS”.
BR-DV3000_E_p03-49 06.8.24, 1:38 PM 25