Telnet to affected sun storedge t3+ array, Verify tje loopcard state with fru stat, Re-enable the disk if possible – Sun Microsystems StorEdge 6900 Series User Manual

Page 126: Replace the disk, if necessary

Advertising
Telnet to affected sun storedge t3+ array, Verify tje loopcard state with fru stat, Re-enable the disk if possible | Replace the disk, if necessary | Sun Microsystems StorEdge 6900 Series User Manual | Page 126 / 162 Telnet to affected sun storedge t3+ array, Verify tje loopcard state with fru stat, Re-enable the disk if possible | Replace the disk, if necessary | Sun Microsystems StorEdge 6900 Series User Manual | Page 126 / 162
Advertising
This manual is related to the following products:
See also other documents in the category Sun Microsystems Hardware: