Sun Microsystems StorEdge 6900 Series - Manual (Page 83)

Chapter 6 Troubleshooting Sun StorEdge FC Switch-8 and Switch-16 Devices 67
For Internal Use Only
switch port StateChange+ [ Info/Action ] port.1
in SWITCH diag185
( ip=
xxx.20.67.185 ) is
now Available (status-
state changed from
OFFLINE to ONLINE)
Port on switch is
now available.
switch port StateChange- Red Y [ Info/Action ] port.1
in SWITCH diag185
( ip= xxx .20.67.185 )
is now Not-Available
(status state changed
from ONLINE to
OFFLINE)
Information: A port
on the switch has
logged out of the
Fabric and has gone
offline.
Recommended
action:
1. Verify cables,
GBICs, and
connections
along the Fibre
Channel path.
2. Check Storage
Automated
Diagnostic
Environment
SAN Topology
GUI to identify
failing segment
of the data path.
3. Verify the correct
FC switch
configuration.
switch enclosure Statistics [ Info ] Statistics
about switch d2-
swb1
(ipxxx.0.0.41)
10002000007a609
Port Statistics
TABLE 6-1 Storage Automated Diagnostic Environment Event Grid for Switches (Continued)
Cat Component EventType Sev Action Description Information/Action