Using unix commands – Sun Microsystems StorEdge 6900 Series User Manual

Page 12

Advertising
background image

xii

Sun StorEdge 3900 and 6900 Series Troubleshooting Guide • March 2002

Chapter 7

provides detailed information for troubleshooting the virtualization

engines.

Chapter 8

describes how to troubleshoot the Sun StorEdge T3+ array devices. Also

included in this chapter is information about the Explorer Data Collection Utility.

Chapter 9

discusses ethernet hub troubleshooting. Information associated with the

3COM Ethernet hubs is limited in this guide, however, as this is third-party
information.

Appendix A

provides virtualization engine references, including SRN and SNMP

Reference, an SRN/SNMP single point of failure table, and port communication and
service code tables.

Appendix B

provides a list of SUNWsecfg Error Messages and recommendations for

corrective action.

Using UNIX Commands

This document may not contain information on basic UNIX

®

commands and

procedures such as shutting down the system, booting the system, and configuring
devices.

See one or more of the following for this information:

Solaris Handbook for Sun Peripherals

AnswerBook2™ online documentation for the Solaris™ operating environment

Other software documentation that you received with your system

Advertising
This manual is related to the following products: