SOYO SY-6IWM - Manual (Page 34)

Hardware Installation SY-6IWM
30
5. IDE LED
Attach the 2-pin IDE device LED cable to the corresponding IDE LED header on
the Motherboard. This will cause the LED to lighten when an IDE (HDD, CD-
ROM) device is active.
6. ATX Power On/Off Switch
Attach the 2-pin momentary type switch to the PWRBT header for turning On or
Off your ATX power supply.
HDD LED Pin Assignment
+
_
LED Anode LED Cathode
PWRBT Pin Assignment
Power On/Off GND
1