SOYO SY-6IWM - Manual (Page 73)

BIOS Setup Utility SY-6IWM
69
3-5.1 IDE Device Controls
IDE Controls Setting Description Note
Disabled Turn off the on-board IDE On-Chip PCI IDE
Ø Primary
Ø Secondary
Enabled Use the on-board IDE Default
mode 0-4 0 is the slowest speed
4 is the fastest speed IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø
Secondary Slave PIO
Auto For better performance and
stability, we suggest you
use the Auto setting to set
the HDD control timing. Default
Disabled IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
Auto Select Auto to enable Ultra
DMA Mode support. Default
3-5.2 Keyboard Controls
Keyboard Controls Setting Description Note
Disabled USB Controller
Enabled Select Enabled if your system
contains a Universal Serial Bus
(USB) controller and you have USB
peripherals. Default
Disabled Turn off the on-board IDE Default USB Keyboard
Support
Enabled Use a USB keyboard
PCI Slot Default Init Display First
AGP
Choose which card – AGP Display
card or PCI VGA card – to initialize
first.
3-5.3 IDE HDD Block Mode
Setting Description Note
Disabled IDE HDD Block Mode
Enabled Invokes multi-sector
transfer instead of one
sector per transfer. Not all
HDDs support this function. Default