SOYO SY-6IWM - Manual (Page 38)

Hardware Installation SY-6IWM
34
2-3.3.5 Other Connections
1. Serial Port COM2
In addition to the onboard serial connector COM1 located at the rear panel, your
Motherboard comes with a second serial port COM2 equipped with a flat cable and
external connector.
The Motherboard package includes one serial port flat cable with a 9-pin
connector.
Plug the 9-pin end of the flat cable into the COM2 serial connector on the
Motherboard, as shown in the figure below, then fix the external 9-pin connector to
the rear panel of the computer case. Then plug your serial device cable directly
into this 9-pin male connector located at the back of your computer.
COM 2
9-pin serial
flat cable
9-pin male external
serial connector