SOYO SY-6IWM - Manual (Page 75)

BIOS Setup Utility SY-6IWM
71
3 Choose DMA3 Default ECP Mode use DMA
1 Choose DMA1
If [Parallel Port Mode] is set to [EPP] mode
EPP 1.9 Select EPP port type 1.9 EPP Mode Select
EPP 1.7 Select EPP port type 1.7 Default
3-5.7 Others Optional
Setting Description Note
On The system will switch on
when power comes back after
a power failure.
Off The system will remain off
when power comes back after
a power failure. Default
PWRON After PWR-
Fail
Former-Sts The system will return to the
state it was in before the
power failure when power
returns. (i.e: If the system was
on, it will switch on again, if it
was off, it will remain off)
Disabled
201
Default
Game Port Address
209
Set the I/O base address for
the ON board game port under
this item.
Others Optional
Setting Description Note
Disabled Default
330
Midi Port Address
300
Set the I/O address for the on
board Midi port here.
If [Midi Port Address] is set to [330]/[300] mode
5 Midi Port IRQ
10
Select the IRQ that the Midi
port uses under this them.
Default