SOYO SY-6IWM - Manual (Page 52)

Hardware Installation SY-6IWM
48
Step 3.
Select [Soyo Combo Feature]
(a) CPU Host/PCI Clock
CPU Frequency (MHz) 500MHz( 66 x 7.5) 750MHz (100 x 7.5)
Manual 533MHz ( 66 x 8.0) 800MHz (100 x 8.0)
200MHz (66 x 3.0) 300MHz (100 x 3.0) 400MHz (133 x 3.0)
233MHz (66 x 3.5) 350MHz (100 x 3.5) 466MHz (133 x 3.5)
266MHz (66 x 4.0) 400MHz (100 x 4.0) 533MHz (133 x 4.0)
300MHz (66 x 4.5) 450MHz (100 x 4.5) 600MHz (133 x 4.5)
333MHz (66 x 5.0) 500MHz (100 x 5.0) 667MHz (133 x 5.0)
366MHz (66 x 5.5) 550MHz (100 x 5.5) 733MHz (133 x 5.5)
400MHz (66 x 6.0) 600MHz (100 x 6.0) 800MHz (133 x 6.0)
433MHz (66 x 6.5) 650MHz (100 x 6.5) 866MHz (133 x 6.5)
466MHz ( 66 x 7.0) 700MHz(100 x 7.0) 933MHz (133 x 7.0)
Select the working frequency of your Pentium ® III, Pentium ® II & Celeron

processor among these preset values.
Note: Mark the checkbox that corresponds to the working frequency of your
Pentium ® III, Pentium ® II & Celeron

processor in case the CMOS configuration
should be lost.
(b) CPU Ratio
After you have selected the CPU Host/ PCI Clock, choose the right multiplier for
the CPU. CPU Ratio options are:
o
x 2
o
x 2.5
o
x 3
o
x 3.5
o
x 4
o
x 4.5
o
x 5
o
x 5.5
o
x 6
o
x 6.5
o
x 7
o
x 7.5
o
x 8
The CPU frequency is then defined as [host clock freq.] x [multiplier], and should
the working frequency of your CPUs processor.
Step 4.
Select [Save & Exit Setup]
Press <Enter> to save the new configuration to the CMOS memory, and continue
the boot sequence.