SOYO SY-6IWM - Manual (Page 72)

BIOS Setup Utility SY-6IWM
68
3-5 INTEGRATED PERIPHERALS
Caution: Change these settings only if you are already familiar with the
Chipset.
The [INTEGRATED PERIPHERALS] option changes the values of the chipset
registers. These registers control the system options in the computer.
The following screen shows setup default settings.
CMOS Setup Utility – Copyright ( C ) 1984-1999 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE Enabled
5
On-Chip Secondary PCI IDE Enabled
Item Help
IDE Primary Master PIO Auto
IDE Primary Slave PIO Auto
IDE Secondary Master PIO Auto
IDE Secondary Slave PIO Auto
IDE Primary Master UDMA Auto
IDE Primary Slave UDMA Auto
IDE Secondary Master UDMA Auto
IDE Secondary Slave UDMA Auto
USB Controller Enabled
USB Keyboard Support Disabled
Init Display First PCI Slot
IDE HDD Block Mode Enabled
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
x RxD , TxD Active Hi, Lo
x IR Transmittiion delay Enabled
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
x EPP Mode Select EPP1.7
x ECP Mode Use DMA 3
PWRON After PWR-Fail Off
Game Port Address 201
Midi Port Address Disabled
x Midi Port IRQ 10
6
Menu Level 4
бваЯ:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
The following tables describe each field in the INTEGRATED PERIPHERALS
Menu and provide instructions on how to configure the IDE controls, FDC
controls, and the onboard serial and parallel ports.