SOYO SY-6IWM - Manual (Page 37)

Hardware Installation SY-6IWM
33
3. Universal Serial Bus USB1/USB2
This Motherboard provides two USB ports for your additional devices. Plug the
USB device jack into the available USB connector USB1 or USB2.
- Standard device drivers come with the Win98 for commonly used USB
devices.
- With Win95, use the flow UHCI specifications.
4. Onboard Serial Port COM1
External peripherals that use serial transmission scheme include:
- serial mouse,
- and modem.
Plug the serial device cables directly into the COM1 9-pin male connector located
at the rear panel of the Motherboard.
5. VGA monitor connector
Plug the monitor cable into the 15-pin female VGA connector located at the real
panel of the motherboard.
6. Onboard Joystick port/audio
This Motherboard provides Joystick port and audio.
- Attach the joystick cable to the 15-pin JOYSTICK port at the rear panel of
you motherboard.
- This Motherboard features three built-in audio-stereo ports (labeled line-in,
line-out, and mic jack) convenient to directly plug-in all your external audio
devices.